Researchers investigate the feasibility of wireless in-lane charging on SH1
![](https://www.nztrucking.co.nz/wp-content/uploads/2022/11/auckland-southern-corridor-image__FillWzYwMCw2MDBd-uai-600x337.jpeg)
Researchers from the University of Auckland are investigating the feasibility of wireless in-lane charging on SH1 in a drive towards more sustainable travel.
The impact of wireless electric vehicle charging pads on a section of Auckland motorway, including economic feasibility, charging lane length, effects on traffic flow and energy consumption, was examined in a recent study.
Engineering PhD candidate Ramesh Majhi, Faculty of Engineering senior lecturer Dr Prakash Ranjitkar and Dr Selena Sheng developed a traffic simulation framework and a ‘state of charge’ model to evaluate the impacts of dynamic wireless charging facilities, using a 90km section the highway.
Dynamic wireless charging pads are embedded into the road and use electromagnetic induction to charge electric vehicles while they’re moving.
The researchers investigated the economic feasibility of the wireless system in terms of the total cost associated with a section of SH1 by comparing it to the cost associated with using plug-in charging stations within 1km of the highway corridor.
They found that the total investment cost of a DWC facility in the corridor for a system with a 50-kilowatt inductive power transfer capacity is $1.59 million per year when traffic flows freely compared to $1.42 million per year in the case of peak hour traffic.
The cost variations due to faster speeds when traffic moves freely; hence, more charging length is required to satisfy the demand.
Without considering the time it would take to drive to a static plug-in charging station, a wireless charging lane would only be less costly at 125kW and above, according to the paper.
However, when comparing the feasibility of both charging facilities in terms of the total cost, the researchers say it’s imperative to consider the value of time (travel time, delay, and charging time), which is substantially more for plug-in charging stations compared to in-road wireless charging. And at a higher inductive power transfer capacity, such as 75kW and above, the wireless in-road charging facility becomes less costly compared to the typical plug-in set-up under peak-hour conditions while taking the cost of travel time into account.
Meanwhile, as the EV population increases, the time costs tend to become more significant to utilise plug-in charging stations, which will make DWC more feasible and competitive in the future, say the researchers.
“As the existing plug-in stations can handle only limited EVs at a given time, with the increase in charging demand, the wireless in-road facility will soon become more competitive compared to the current plug-in charging stations due to savings in costs associated with travel time, delay, and charging time,” said lead author Ramesh Majhi.
“Moreover, with advanced research in dynamic wireless charging system components, the construction cost of a wireless charging lane will eventually decrease, making it more feasible than existing plug-in charging.”